Fujitsu Eternus DX100 S3 User Manual page 796

Chapter 7 NAS Function Setting and Display
7.7 Authentication Settings > set nas-ad
-domain
-user
■ Example(s)
The following example shows settings for creating a new setting value:
CLI> set nas-ad -server1 10.21.138.254 -user example_user -domain example.domain
The following examples shows settings for deleting a setting value:
CLI> set nas-ad -server1 "" -server2 "" -server3 "" -user "" -domain ""
This parameter specifies the domain name of the Active Directory authentication server. To
delete a setting, specify a null character (""). If omitted, this parameter is not changed.
domain_name
Domain name
Example: -domain example.domain
"" The setting is deleted.
This parameter specifies the ID of the Active Directory domain administrator. To delete a
setting, specify a null character (""). If omitted, this parameter is not changed.
user_id
User ID
Example: -user example-id
"" The setting is deleted.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
796
P2X0-1210-05ENZ0