Fujitsu Eternus DX100 S3 User Manual page 735

Chapter 7 NAS Function Setting and Display
7.1 Shared Folders > show nas-share
■ Output
Share
Volume No.
Volume Name
Share
Service
Access
Oplocks
Owner
Group
NFS Allow Host
CIFS Allow Host
CIFS Deny Host
■ Example(s)
The following example shows settings when an option is omitted:
CLI> show nas-share
Share
No. Name
----- --------------------------------
0 NAS-SHARE#0
1 NAS-SHARE#1
2 NAS-SHARE#2
3 NAS-SHARE#3
4 NAS-SHARE#4
Identifier of the NAS shared folder
No. NAS shared folder number
Name NAS shared folder name
Volume number
Volume name
Status of sharing (Active or Inactive)
File system (NFS, CIFS, or NFS-CIFS)
Access privileges (Read or Read-Write) of the shared folder
Indicates whether the oplocks function is set to Enable or Disable.
(If NFS is selected, a hyphen (-) is displayed.)
Owner of the shared folder
Group of the shared folder
Information on hosts to which access is allowed
(This information only appears when NFS or NFS/CIFS is used as the protocol.)
Information on hosts to which access is allowed
(This information only appears when CIFS or NFS/CIFS is used as the protocol.)
Information on hosts to which access is denied
(This information only appears when CIFS or NFS/CIFS is used as the protocol.)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
735
P2X0-1210-05ENZ0