Fujitsu Eternus DX100 S3 User Manual page 132

Chapter 3 Configuration Settings and Display
3.2 Volume Management > expand volume
-size
■ Example(s)
The following example expands the volume named "VOL001" as a new 800GB area in RAID group #5:
CLI > expand volume -volume-name VOL001 -rg-number 5 -size 800gb
The following example expands the volume named "VOL001" as a new 800GB area in RAID group #5 and a
new 400GB area in RAID group #6:
CLI > expand volume -volume-name VOL001 -rg-number 5,6 -size 800gb,400gb
The following example expands the Thin Provisioning Volume named "TPV001" as a new 800GB area:
CLI > expand volume -volume-name TPV001 -size 800gb
This parameter specifies the capacity that is to be added when expanding a volume. When
expanding a TPV, specify the capacity that is required after expansion is performed. Terabytes
(TB), gigabytes (GB), or megabytes (MB) can be specified. For volume expansion,
concatenated source volumes and volumes that are to be concatenated must be 1GB or more.
Multiple parameters can be specified, but these parameters must match the equivalent RAID
group identifiers that are specified in the previous parameter.
A volume with a maximum capacity of 128TB can be created (for an ODX buffer volume, the
maximum is 1TB).
Example: 1tb, 120gb, 512mb
size
Capacity of the volume after it is expanded (in TB, GB, or MB)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
132
P2X0-1210-05ENZ0