Fujitsu Eternus DX100 S3 User Manual page 163

Chapter 3 Configuration Settings and Display
3.2 Volume Management > create odx-buffer-volume
-size
-priority
-attention
-encryption
■ Example(s)
The following example creates the ODX Buffer volume that is named "VOL001" in a RAID group that is named
"RGP001". The volume size is 1GB:
CLI> create odx-buffer-volume -name VOL001 -rg-name RGP001 -type standard -size 1gb
The following example creates an encrypted ODX Buffer volume:
CLI> create odx-buffer-volume -name VOL001 -rg-name RGP001 -type standard -size 1tb -encryption enable
The following example creates the ODX Buffer volume called TPV1 in TPP#01. The volume type of the ODX
Buffer volume is TPV and the attention level is 80%:
CLI> create odx-buffer-volume -name TPV1 -pool-number 01 -type tpv -attention 80
This parameter specifies the size of the ODX Buffer volume. Select whether terabytes (TB),
gigabytes (GB), or megabytes (MB) are used for the capacity. From 1GB to 1TB can be
specified.
Example: 1tb (1TB), 120gb (120GB), 1024mb (1024MB)
size
ODX Buffer volume capacity (in TB, GB, or MB)
max Specify this option to create an ODX Buffer volume with the same capacity as
the largest free capacity in the specified RAID group. This option can be speci-
fied only when the volume type is Standard (Open).
Optional. This parameter is only enabled when the volume type of the ODX Buffer volume is
FTV. Specify the FTSP number to set the priority for allocating a Flexible Tier Sub Pool (FTSP)
to the FTV that is to created. If this parameter is omitted or "auto" is specified, the FTSP is
automatically allocated.
ftsp_number
FTSP number
auto The FTSP is automatically allocated.
Optional. This parameter is only enabled when the volume type of the ODX Buffer volume is
TPV or FTV. Specify the threshold (attention level) for the TPV or FTV. From 1% to 100% can
be specified.
If this parameter is omitted, the default value (80%) is set.
attention
Threshold (attention level) for the TPV or FTV
Optional. This parameter is only enabled when the volume type of the ODX Buffer volume is
Open (Standard). Specify this parameter to encrypt a volume. If "enable" is specified, the
volume data that is specified is encrypted. If this parameter is omitted, "disable" is specified.
enable The volume data is encrypted.
disable No operation.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
163
P2X0-1210-05ENZ0