Chapter 5 System Settings and Display
5.3 System Settings > show ntp
show ntp
This command displays the NTP configuration.
■
Syntax
show ntp
■
Parameter
No parameters.
■
Output
NTP
Primary NTP Server
Primary NTP LAN Port
Secondary NTP Server
Secondary NTP LAN Port
Access Status
It shows whether the NTP function is enabled, or not.
Primary NTP server name
Ethernet port to connect to primary NTP server
Secondary NTP server name
Ethernet port to connect to secondary NTP server (MNT or RMT)
Result of synchronization
YYYY-MM-DD hh:mm:ss no date SYNC
No synchronization result can be found.
YYYY-MM-DD hh:mm:ss Primary NTP Server succeeded SYNC
Synchronization with the primary NTP server succeeded.
YYYY-MM-DD hh:mm:ss Secondary NTP Server succeeded SYNC
Synchronization with the secondary NTP server succeeded.
YYYY-MM-DD hh:mm:ss failed SYNC
Synchronization failed.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
604
P2X0-1210-05ENZ0