Delete Thin-Pro-Pool - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.3 Thin Provisioning Pool Management > delete thin-pro-pool

delete thin-pro-pool

This command deletes an existing Thin Provisioning Pool(s). A Thin Provisioning Pool cannot be deleted if one
or more volumes exist in the pool. All volumes in the specified Thin Provisioning Pool must be deleted before
the Thin Provisioning Pool is deleted.
■ Syntax
delete thin-pro-pool {-pool-number
■ Parameter
-pool-number
or
-pool-name
■ Example(s)
The following example deletes Thin Provisioning Pool #01:
CLI> delete thin-pro-pool -pool-number 01
The following example deletes the Thin Provisioning Pool named TPP05:
CLI> delete thin-pro-pool -pool-name TPP05
pool_numbers
This parameter specifies the Thin Provisioning Pool identifiers. One or more Thin Provisioning
Pool identifiers can be specified. For details, refer to
(page 23).
pool_number
Thin Provisioning Pool number
pool_name
Thin Provisioning Pool name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
| -pool-name pool_names
"1.2.6 Thin Provisioning Pool Syntax"
187
}
P2X0-1210-05ENZ0