Fujitsu Eternus DX100 S3 User Manual page 451

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > set rec-multiplicity
-copy-schedule-mode
■ Example(s)
The following example sets the REC multiplicity to 5:
CLI> set rec-multiplicity -remote-boxid "00DXL#########ED06F21AUABCPJ000001######" -multiplicity 5
The following example sets the Copy Level to 3.
CLI> set rec-multiplicity -remote-boxid "00DXL#########ED06F21AUABCPJ000001######" -priority-level 3
The following example sets the Copy Schedule Mode to Session balancing.
CLI> set rec-multiplicity -remote-boxid "00DXL#########ED06F21AUABCPJ000001######" -copy-schedule-mode ses-
sion-balancing
This parameter specifies the Copy Schedule Mode. If omitted, the existing setting is not
changed.
session-balancing
Session balancing is performed.
dst-rg-balancing
Destination RAID Group balancing is performed.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
451
P2X0-1210-05ENZ0