Fujitsu Eternus DX100 S3 User Manual page 856

Appendix A Error Messages/Error Codes
A.1 Error Messages
Message
number
EA000
EA200
EA201
EA202
EA203
EA204
EA600
EA601
EA602
EA603
EB000
EB001
EB002
EB300
EB301
EB302
EB303
EB304
EB305
EB306
The CM status is not normal.
The CM status is not normal. Wait for a while and try again.
The CA port type is incorrect.
The CA port type is incorrect.
The specified CA port does not exist.
The specified CA port does not exist.
The relevant operation cannot be executed because all of the CAs are NAS CAs.
The relevant operation cannot be executed because all of the CAs are NAS CAs.
Host port mode of the CA port is incorrect.
The port mode of the CA port is incorrect.
The WWPN/WWNN has not been changed.
WWPN/WWNN has not been changed.
No PFM is installed in the device.
A PFM is not installed in the ETERNUS DX.
A PFM is not installed in some of the CMs in the device.
A PFM is not installed in some of the CMs in the ETERNUS DX.
The PFM status is not normal.
The PFM status is not normal.
The number of PFMs is different between the CMs.
The number of PFMs is different between the CMs.
The specified Flexible tier sub pool does not exist.
The specified Flexible tier sub pool does not exist.
One or more TPP or FTSP exists in the device.
A TPP or an FTSP exists in the ETERNUS DX. Delete the TPP or the FTSP.
The Fast Recovery RAID Group cannot be specified.
The Fast Recovery RAID group cannot be specified.
The volume type is incorrect.
The volume type is incorrect.
The volume status is not normal.
The volume status is incorrect.
The type of drive that configures the RLU or the TPP that the volume belongs to is incorrect.
The type of drive that configures the RLU or the TPP that the volume belongs to is incorrect.
The specified volume does not exist.
The specified volume does not exist.
An incorrect UID is specified.
An incorrect UID is specified.
The cache size limit is set.
The cache size limit is set.
The volume in Fast Recovery RAID Group cannot be specified.
The volume in Fast Recovery RAID group cannot be specified.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Message
Countermeasure for the error
856
P2X0-1210-05ENZ0