Fujitsu Eternus DX100 S3 User Manual page 435

Chapter 4 Copy Function Settings and Display
4.1 Advanced Copy Management > set host-port-mode
■ Example(s)
The following example switches host interface port #0 on CM#1 CA#0 to RA mode:
CLI> set host-port-mode -port 100 -mode ra
The following example reverts port #3 on CM#1 CA#0 to CA mode:
CLI> set host-port-mode -port 103 -mode ca
The following example switches all the host interface ports to RA mode:
CLI> set host-port-mode -port all -mode ra
435
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0