Cisco Catalyst 4500 Series Command Reference Manual page 1027

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
MD5 digest
Configuration last modified by 172.20.52.18 at 9-22-99 11:18:20
Local updater ID is 172.20.52.18 on interface Vl1 (lowest numbered VLAN interfac
e found)
Switch#
This example shows how to display only those lines in the show vtp output that contain the word
Summary:
Switch# show vtp counters | include Summary
Summary advertisements received
Summary advertisements transmitted : 32
Trunk
Switch#
Table 2-43
Table 2-43
Field
Summary advertisements received
Subset advertisements received
Request advertisements received
Summary advertisements transmitted
Subset advertisements transmitted
Request advertisements transmitted
Number of config revision errors
Number of config digest errors
Number of V1 summary errors
Trunk
Join Transmitted
Join Received
Summary advts received from
non-pruning-capable device
Number of existing VLANs
Configuration Revision
Maximum VLANs supported locally
Number of existing VLANs
VTP Operating Mode
VTP Domain Name
VTP Pruning Mode
VTP V2 Mode
VTP Traps Generation
MD5 digest
OL-27596 -01
Join Transmitted Join Received
describes the fields in the show vtp command output.
show vtp Command Output Fields
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
: 0xE6 0xF8 0x3E 0xDD 0xA4 0xF5 0xC2 0x0E
: 1
Summary advts received from
Description
Total number of summary advertisements received.
Total number of subset advertisements received.
Total number of request advertisements received.
Total number of summary advertisements transmitted.
Total number of subset advertisements transmitted.
Total number of request advertisements transmitted.
Number of config revision errors.
Number of config revision digest errors.
Number of V1 summary errors.
Trunk port participating in VTP pruning.
Number of VTP-Pruning Joins transmitted.
Number of VTP-Pruning Joins received.
Number of Summary advertisements received from
nonpruning-capable devices.
Total number of VLANs in the domain.
VTP revision number used to exchange VLAN information.
Maximum number of VLANs allowed on the device.
Number of existing VLANs.
Indicates whether VTP is enabled or disabled.
Name of the VTP domain.
Indicates whether VTP pruning is enabled or disabled.
Indicates the VTP V2 mode as server, client, or transparent.
Indicates whether VTP trap generation mode is enabled or
disabled.
Checksum values.
show vtp
2-969