Macro Global - Cisco ME 3800X Command Reference Manual

macro global

macro global
To apply a macro to a switch or to apply and trace a macro configuration on a switch, use the macro
global command in global configuration mode.
Syntax Description apply
trace
macro-name
parameter value
Defaults
This command has no default setting.
Command Modes
Global configuration
Command History Release
12.2(52)EY
Usage Guidelines
You can use the macro trace macro-name global configuration command to apply and to show the
macros running on a switch or to debug the macro to find any syntax or configuration errors.
If a command fails because of a syntax error or a configuration error when you apply a macro, the macro
continues to apply the remaining commands to the switch.
When creating a macro that requires the assignment of unique values, use the parameter value keywords
to designate values specific to the switch.
Keyword matching is case sensitive. All matching occurrences of the keyword are replaced with the
corresponding value. Any full match of a keyword, even if it is part of a larger string, is considered a
match and is replaced by the corresponding value.
Some macros might contain keywords that require a parameter value. You can use the macro global
apply macro-name ? command to display a list of any required values in the macro. If you apply a macro
without entering the keyword values, the commands are invalid and are not applied.
When you apply a macro to a switch, the macro name is automatically added to the switch. You can
display the applied commands and macro names by using the show running-configuration user EXEC
command.
You can delete a global macro-applied configuration on a switch only by entering the no version of each
command contained in the macro.
Cisco ME 3800X and ME 3600X Switch Command Reference
2-162
macro global {apply | trace} macro-namemacro-name [parameter value] [parameter value]
[parameter value]
Applies a macro to the switch.
Applies a macro to a switch and to debug the macro.
Specifies the name of the macro.
(Optional) Specifies unique parameter values that are specific to the switch. You
can enter up to three keyword-value pairs. Parameter keyword matching is case
sensitive. All matching occurrences of the keyword are replaced with the
corresponding value.
Modification
This command was introduced.
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
OL-28238-01