Clear Ip Lisp Statistics Lsp-9 - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series LISP Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
clear ip lisp statistics
To clear the Locator/ID Separation Protocol (LISP) ingress tunnel router (ITR) and Egress Tunnel
Router (ETR) IPv4 address-family packet count statistics, use the clear ip lisp statistics command.
vrf vrf-name
Syntax Description
None
Defaults
Global configuration mode
Command Modes
network-admin
Supported User Roles
vdc-admin
Command Historyd. Release
5.0(1.13)
5.0(3.lisp)
The clear ip lisp statistics command clears all of the LISP ITR and ETR IPv4 address-family packet
Usage Guidelines
count statistics. IPv4 address family packet count statistics are maintained for all LISP control plane
packets. These packet counters are displayed using the show ip lisp statistics command.
This command does not require a license.
This example shows how to clear the LISP ITR and ETR IPv4 address-family packet count statistics:
Examples
switch# clear ip lisp statistics
switch#
Related Commands Command
show ip lisp statistics
OL-25345-01
clear ip lisp statistics [vrf vrf-name]
(Optional) Specifies virtual routing and forwarding (VRF) with which to clear
the LISP statistics.
Modification
This command was introduced.
This command was modified.
Description
Displays LISP IPv4 address-family statistics.
Cisco Nexus 7000 Series NX-OS LISP Command Reference
clear ip lisp statistics
LSP-9