Show Processes Ipc Flow-Control - Dell C9000 Series Reference Manual

show processes ipc flow-control

Display Single Window Protocol Queue (SWPQ) statistics.
C9000 Series
Syntax
show processes ipc flow-control [cp | lp | pe | rp {slot-id |
all}]
Parameters
cp
lpslot-id
pe pe-id
rp
Defaults Display SWPQ statistics on all switch CPUs (Control Processor, Route Processor, and
line cards).
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9 (0.0)
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
Enter the keyword cp to view SWPQ statistics for the Control
Processor CPU.
Enter the slot ID of the line card for which you want to view IPC
message statistics. The range of switch slot IDs is from 0 to 11.
Enter linecard all to view IPC statistics for all line cards.
Enter the keyword pe to view IPC message statistics on the port
extender (PE) .The PE ID range is from 0 to 255.
Enter the keyword rp to view SWPQ statistics for the Route
Processor CPU.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
NOTE: The pe option is only visible when the feature
extended bridge is enabled.
Control and Monitoring 152