Ip Ftp Password; Ip Ftp Source-Interface - Dell Force10 Z9000 Reference Manual

ip ftp password

Specify a password for outgoing FTP connections.
C-Series, E-Series, S-Series, Z-Series
Syntax ip ftp password [encryption-type] password
To remove a password and return to the default setting, use the no ip ftp password
[password] command.
Parameters
encryption-type
password
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage The password is listed in the configuration file; you can view the password by entering the
Information show running-config ftp command.
The password configured by the ip ftp password command is used when you use the
ftp: parameter in the copy command.
Related
copy
Commands
ip ftp username

ip ftp source-interface

Specify an interface's IP address as the source IP address for FTP connections.
C-Series, E-Series, S-Series, Z-Series
Syntax ip ftp source-interface interface
116
(OPTIONAL) Enter one of the following numbers:
•
•
Enter a string up to 40 characters as the password.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
– copy files.
– sets the user name for the FTP sessions.
0 (zero) for an unecrypted (clear text) password
7 (seven) for a hidden text password