show line
Use the show line command in User EXEC or Privileged EXEC modes to
display line parameters.
Syntax
show line [console | telnet | ssh]
•
console — Console terminal line.
•
telnet — Virtual terminal for remote console access (Telnet).
•
ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
User EXEC and Privileged EXEC mode, Config mode and all Config sub-
modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the line configuration.
console>show line
Console configuration:
Interactive timeout: Disabled
History: 10
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Line Commands
1469