To Set Up A Password And Allow Hot Desking; Using The Hot Desking Feature - Nortel BCM50 2.0 Configuration Manual

148 Chapter 20 Global VoIP features
• If the target telephone has a headset, but the originating telephone does not, when Hot desking
is activated, the headset on the target telephone no longer works. To correct this situation, you
must cancel Hot desking, plug a headset into the originating telephone, then re-establish Hot
desking at the target telephone.
Originating telephone

Using the Hot desking feature

Hot desking requires that you set up a password and permission on the originating telephone, and
activate Hot desking from a target telephone.
Setting up a password and allowing Hot desking
Set up the password on the originating telephone. This process also allows you to determine if you
want the telephone to be able to be diverted.

To set up a password and allow Hot desking

1 Enter FEATURE *999.
2 Press ADMIN.
3
Enter a new password, or change an existing password, and press OK.
NN40020-300 NN40020-300
Target telephone
Head set feature active on target set after
Hot desking?
Yes
No
No