Upgrade Option 11C Without Fiber Connection To Fiber-Optic Connection - Nortel Meridian 1 Option 11C Upgrade Manual

Upgrade a two-cabinet system with metal cable to Option 11C
— personal computer (PC) equipped with XModem CRC software to
run the X11 CCBR feature
— Database Upgrade Tool (extracts data from the cartridge)
Note: The PC can be on-site or located remotely
• NTAK11 cabinet
• Two Fiber Routing Guides (one comes with the NTAK11 cabinet and an
additional one is available for the expansion cabinet)
• NTDK27 Ethernet cable (optional)
Upgrade Option 11C without fiber connection to
fiber-optic connection
For an NTAK12 expansion cabinet upgrade on an upgraded Option 11C, you
need the following items:
• NTAK11 cabinet
• Two Fiber Routing Guides
• NTDK22 Single Port or NTDK84 Dual Port Fiber Expansion
Daughterboard
Note: Use the NTDK22 or NTDK84 Fiber Expansion Daughterboard
when the expansion cabinet is within 10 m (33 ft) of the main cabinet.
Use one of the following if you plan to move the expansion cabinet up to
3 km (1.8 mi) from the main cabinet:
— NTDK24 (Multimode)
— NTDK79 (Single Mode)
— NTDK85 (Dual Port) Fiber Expansion Daughterboard
• NTDK23 Fiber Receiver card
Note: Use the NTDK23 Fiber Receiver card when the expansion cabinet
is within 10 m (33 ft) of the main cabinet. Use an NTDK25 (Multimode)
or NTDK80 (Single Mode) Fiber Receiver card if you plan to move the
expansion cabinet up to 3 km (1.8 mi) of the main cabinet.
• A0632902 (was A0618443) Fiber-optic cable (only required with the
NTDK22)
Option 11C and 11C Mini
Page 35 of 224
Upgrade Procedures Guide