Lock - HP 6125XLG Command Reference Manual

Views
User interface view
Predefined user roles
network-admin
Parameters
minutes: Specifies the number of minutes for the idle timeout, in the range of 0 to 35791. The default is
10 minutes.
seconds: Specifies the number of seconds for the idle timeout, in the range of 0 to 59. The default is 0
seconds.
Usage guidelines
The system automatically terminates the user connection on the user interface if there is no information
interaction between the device and the user within the idle timeout.
Setting the idle-timeout timer to 0 disables the idle timeout function.
Examples
# Set the idle timeout to 1 minute and 30 seconds for user interface AUX 0.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] idle-timeout 1 30

lock

Use lock to lock the current user interface. This method prevents unauthorized users from using the user
interface.
Syntax
lock
Default
By default, the system does not lock any user interface.
Views
User view
Predefined user roles
network-admin
Usage guidelines
This command is not supported in FIPS mode.
After executing the lock command, you must enter the password for unlocking the user line and confirm
the password by entering it again.
To unlock the user interface, press Enter and enter the correct password.
Examples
# Lock the current user interface and then unlock it.
<Sysname> lock
Please input password<1 to 16> to lock current user terminal interface:
25