Srx5K-Re3-128G Routing Engine Boot Sequence; Srx5800 Line Cards And Modules - Juniper SRX5800 Hardware Manual

Table 32: SRX5K-RE3-128G Routing Engine LEDs (continued)
Label Color
OK/FAIL Green
Yellow
MASTER Blue
DISK1 Green
-
DISK2 Green
-

SRX5K-RE3-128G Routing Engine Boot Sequence

Booting in a SRX5K-RE3-128G Routing Engine follows this sequence—the USB device, SSD1, SSD2, and
LAN. SSD1 is the primary boot device. The boot sequence is tried twice for SSD1 and SSD2.

SRX5800 Line Cards and Modules

IN THIS SECTION
SRX5400, SRX5600, and SRX5800 Services Gateway Card Overview | 98
Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways | 99
SRX5800 Services Gateway Card Cage and Slots | 103
SRX5800 Services Gateway SPC Description | 105
Services Processing Card SRX5K-SPC-2-10-40 Specifications | 105
Services Processing Card SRX5K-SPC-4-15-320 Specifications | 109
Services Processing Card SRX5K-SPC3 Specifications | 114
Modular Port Concentrator (SRX5K-MPC) Specifications | 118
MIC with 20x1GE SFP Interfaces (SRX-MIC-20GE-SFP) | 120
State Description
On steadily Routing Engine is powering up.
On steadily Routing Engine is not powering up, which indicates
failure.
On steadily This Routing Engine is the master Routing Engine.
Blinking Indicates presence of disk activity.
Off There is no disk activity.
Blinking Indicates presence of disk activity.
Off There is no disk activity.
97