Overview Of Installing The Srx5800 Services Gateway - Juniper SRX5800 Hardware Manual

Overview of Installing the SRX5800 Services Gateway

To install the SRX5800 Services Gateway:
1. Prepare your installation site as described in
Gateway" on page
2. Review the safety guidelines explained in SRX5800 Services Gateway General Safety Guidelines and
Warnings.
3. Unpack the services gateway and verify the parts.
a. Unpacking the SRX5800 Services Gateway on page 209
b. Verifying the SRX5800 Services Gateway Parts Received on page 210
4. Install the mounting hardware.
Installing the SRX5800 Services Gateway Mounting Hardware for a Four-Post Rack or Cabinet on
page 213
Installing the SRX5800 Services Gateway Mounting Hardware in an Open-Frame Rack on page 215
5. Remove components from the services gateway chassis as described in
the SRX5800 Chassis Before Installing It in the Rack" on page
6. Lift the services gateway on to the rack as described in
Chassis in the Rack" on page
7. Reinstall components into the services gateway chassis as described in
the SRX5800 Services Gateway Chassis After Installing It in the Rack" on page
8. Connect cables to the network and external devices.
Connecting the SRX5800 Services Gateway to a Management Console or an Auxiliary Device on
page 233
Connecting the SRX5800 Services Gateway to a Network for Out-of-Band Management on page 234
Connecting the Alarm Relay Wires to the SRX5800 Services Gateway Craft Interface on page 266
9. Connect the grounding cable as described in
163.
224.
"Site Preparation Checklist for the SRX5800 Services
217.
"Installing the SRX5800 Services Gateway
"Grounding the SRX5800 Services Gateway" on page
"Removing Components from
"Reinstalling Components in
225.
207
239.