Juniper SRX5800 Hardware Manual page 254

}
}
security-zone untrust {
interfaces {
}
}
}
policies {
from-zone trust to-zone untrust {
policy bob {
}
}
}
}
18. Commit the configuration to activate it on the device.
[edit]
admin@# commit
19. Optionally, configure additional properties by adding the necessary configuration statements. Then
commit the changes to activate them on the device.
[edit]
admin@# commit
20. When you have finished configuring the device, exit configuration mode.
[edit]
admin@# exit
admin@host>
ge-6/3/5.0;
ge-6/2/0.0;
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
255