Srx5800 Services Gateway Craft Interface Alarm Relay Contacts - Juniper SRX5800 Hardware Manual

node0:
--------------------------------------------------------------------------
FPC 1 already online
The command output indicates the MPC is online.
Confirm that the MPC in the chassis is online:
user@host> show chassis fpc
node0:
--------------------------------------------------------------------------
Slot State
0 Online
1 Online
2 Online

SRX5800 Services Gateway Craft Interface Alarm Relay Contacts

The craft interface has two alarm relay contacts for connecting the device to external alarm devices (see
Figure 7 on page 42). Whenever a system condition triggers either the major or minor alarm on the craft
interface, the alarm relay contacts are also activated. The alarm relay contacts are located on the upper
right of the craft interface.
Figure 7: Alarm Relay Contacts
The alarm relay contacts consist of two sets of connectors, one set for each of the two alarms (major and
minor). For each alarm color there are three connectors.
the connectors.
Temp CPU Utilization (%)
(C) Total Interrupt
37 6
44 11
49 22
Memory Utilization (%)
DRAM (MB) Heap
0 2048
0 1024
0 1024
Table 10 on page 43 describes the functions of
Buffer
19 14
23 29
14 25
42