Srx5800 Services Gateway Craft Interface Overview - Juniper SRX5800 Hardware Manual

Services gateway

Hide thumbs Also See for SRX5800:

Table of Contents

Figure 5: Cable Management System

Release handles

SRX5800 Services Gateway Craft Interface Overview

The craft interface shows you status and troubleshooting information at a glance and lets you perform

many system control functions (see

interface is located on the front of the services gateway above the upper fan tray.

Figure 6: Front Panel of the Craft Interface

The craft interface draws its power from the SCBs installed in the SCB slots 0, 1, and 2

at the center of the card cage. At least one SCB must be installed in the services gateway for

the craft interface to obtain power.

Maintenance linkage

Figure 6 on page

IOC and SPC LEDs and online/offline buttons

36). It is hot-insertable and hot-removable. The craft

YELLOW ALARM RED ALARM