Reinstalling Components In The Srx5800 Services Gateway Chassis After Installing It In The Rack - Juniper SRX5800 Hardware Manual

Figure 93: Installing the Services Gateway in the Rack
NOTE: This illustration depicts the services gateway being installed in an open-frame rack.
Reinstalling Components in the SRX5800 Services Gateway Chassis After
Installing It in the Rack
After the services gateway is installed in the rack, reinstall the removed components before booting and
configuring the services gateway. You reinstall components first in the rear of the chassis, and then in the
front:
Reinstalling Power Supplies After Installing the SRX5800 Services Gateway Chassis | 226
1.
Reinstalling Fan Trays After Installing the SRX5800 Services Gateway Chassis | 227
2.
225