Removing a Routing Engine
• Place an electrostatic bag or antistatic mat on a flat, stable surface.
• Attach an ESD grounding strap to your bare wrist, and connect the strap to one of the
ESD points on the chassis.
• Verify that the Routing Engine LEDs are off.
• Remove any cables that might be attached to the RE and arrange them out of the
way in the CMS.
way in the CMS.
• Loosen the captive screws on the top and bottom of the Routing Engine.
© 2010 Juniper Networks, Inc. All rights reserved.
CONFIDENTIAL
www.juniper.net | 87
FSSSRX5800