Srx5K-Re3-128G Routing Engine Boot Sequence - Juniper SRX5400 Hardware Manual

Table 27: SRX5K-RE3-128G Routing Engine LEDs (continued)
Label Color
OK/FAIL Green
Yellow
MASTER Blue
DISK1 Green
-
DISK2 Green
-

SRX5K-RE3-128G Routing Engine Boot Sequence

Booting in a SRX5K-RE3-128G Routing Engine follows this sequence—the USB device, SSD1, SSD2, and
LAN. SSD1 is the primary boot device. The boot sequence is tried twice for SSD1 and SSD2.
RELATED DOCUMENTATION
Replacing the SRX5400 Services Gateway SCB | 248
Maintaining the SRX5400 Services Gateway Host Subsystem | 245
Replacing the SRX5400 Services Gateway Routing Engine | 251
Replacing a CompactFlash Card in an SRX5K-RE-1800X4 Routing Engine
Replacing a Solid-State Drive in an SRX5K-RE-1800X4 Routing Engine
State
On steadily
On steadily
On steadily
Blinking
Off
Blinking
Off
Description
Routing Engine is powering up.
Routing Engine is not powering up, which indicates
failure.
This Routing Engine is the master Routing Engine.
Indicates presence of disk activity.
There is no disk activity.
Indicates presence of disk activity.
There is no disk activity.
82