Backup Routing Engine Alarms - Juniper SRX5800 Hardware Manual

Table 69: Chassis Component Alarm Conditions on SRX5400, SRX5600, and SRX5800 Services
Gateways (continued)
Chassis
Component Alarm Condition

Backup Routing Engine Alarms

For Services Gateways with master and backup Routing Engines, a master Routing Engine can generate
alarms for events that occur on a backup Routing Engine.
for a backup Routing Engine.
NOTE: Because the failure occurs on the backup Routing Engine, alarm severity for some events
(such as Ethernet interface failures) is yellow instead of red.
NOTE: For information about configuring redundant Routing Engines, see the Junos OS High
Availability Library for Routing Devices.
Remedy
Check environmental
conditions and alarms on
other devices.
Ensure that
environmental factors
(such as hot air blowing
around the equipment)
are not affecting the
temperature sensor.
If the alarm recurs, open
a support case using the
Case Manager link at
https://www. j u ni p er. n et/support/
or call 1-888-314-5822
(toll free, US & Canada)
or 1-408-745-9500
(from outside the United
States).
Table 70 on page 442
Alarm
Severity
lists chassis alarms generated
441