Flex I/O Card Port Module Srx-Ioc-4Xge-Xfp Specifications - Juniper SRX5800 Hardware Manual

Weight
LEDs
Serial Number Location

Flex I/O Card Port Module SRX-IOC-4XGE-XFP Specifications

You use port modules and Flex I/O Cards (Flex IOCs) to add different combinations of small form-factor
pluggable transceiver (SFP), 10-gigabit SFP transceiver (XFP), and copper ports to your services gateway
to suit the specific needs of your network. The SRX-IOC-4XGE-XFP port module
installs into a Flex IOC to add four 10-Gigabit Ethernet XFP ports.
Approximately 1.6 lb (0.7 kg)
OK/FAIL LED, one bicolor:
Steady green–The port module is operating normally.
Red–The port module has failed and is not operating normally.
Off–The port module is powered down.
LINK LED, single color, one per port:
Steady green–The link is active.
Off–No link.
TX/RX LED, single color, one per port:
Blinking green–The port is receiving or transmitting data.
Off–No activity.
The serial number label is located as shown in
Figure 79: Port Module SRX-IOC-16GE-TX Serial Number Label
Figure 79 on page
Serial number
ID label
JX0123
158.
(Figure 80 on page 159)
158