Troubleshooting The Srx5800; Troubleshooting The Srx5800 Services Gateway With The Junos Os Cli - Juniper SRX5800 Hardware Manual

Troubleshooting the SRX5800

IN THIS SECTION

Troubleshooting the SRX5800 Services Gateway with the Junos OS CLI | 425

Troubleshooting the SRX5800 Services Gateway with Chassis and Interface Alarm Messages | 426
Chassis Component Alarm Conditions on SRX5400, SRX5600, and SRX5800 Services Gateways | 426
Troubleshooting the SRX5800 Services Gateway with Alarm Relay Contacts | 443
Troubleshooting the SRX5800 Services Gateway with the Craft Interface LEDs | 443
Troubleshooting the SRX5800 Services Gateway with the Component LEDs | 444
Troubleshooting the SRX5800 Services Gateway Cooling System | 445
Troubleshooting SRX5800 Services Gateway Interface Cards | 445
Troubleshooting SRX5800 Services Gateway MICs and Port Modules | 447
Troubleshooting SRX5800 Services Gateway SPCs | 448
Troubleshooting the SRX5800 Services Gateway Power System | 449
Behavior of the SRX5400, SRX5600, and SRX5800 Services Gateways When the SRX5K-SCBE and
SRX5K-RE-1800X4 in a Chassis Cluster Fail | 455
Troubleshooting the SRX5800 Services Gateway with the Junos OS CLI
The Junos OS command-line interface (CLI) is the primary tool for controlling and troubleshooting services
gateway hardware, Junos OS, routing protocols, and network connectivity. CLI commands display
information from routing tables, information specific to routing protocols, and information about network
connectivity derived from the ping and traceroute utilities.
You enter CLI commands on one or more external management devices connected to ports on the Routing
Engine.
For information about using the CLI to troubleshoot Junos OS, see the appropriate Junos OS configuration
guide.
425