Juniper SRX5800 Hardware Manual page 353

Figure 139: Installing a Flex IOC
10. Grasp both ejector handles and rotate them clockwise simultaneously until the Flex IOC is fully seated.
11. Connect the power cables to the chassis.
12. Power on the services gateway.
13. Use one of the following methods to bring the Flex IOC online:
Press and hold the corresponding online button on the craft interface until the green OK LED next
to the button lights steadily, in about 5 seconds.
Issue the following CLI command:
user@host>request chassis fpc slot slot-number online
For more information about the command, see Junos OS System Basics and Services Command Reference
at www.juniper.net/documentation/.
354