Powering On An Ac-Powered Srx5800 Services Gateway - Juniper SRX5800 Hardware Manual

Services gateway

Hide thumbs Also See for SRX5800:

Table of Contents

Figure 108: Connecting AC Power to the Services Gateway (High-Capacity Power Supplies)

Powering On an AC-Powered SRX5800 Services Gateway

To power on an AC-powered services gateway:

1. Verify that the power supplies are fully inserted in the chassis.

2. Verify that each AC power cord is securely inserted into its appliance inlet.

3. Verify that an external management device is connected to one of the Routing Engine ports (AUX,

CONSOLE, or ETHERNET).

4. Turn on the power to the external management device.