Configuring Interfaces, Zones, And Policies With J-Web - Juniper SRX5800 Hardware Manual

[edit]
root@# set interfaces fxp0 unit 0 family inet address address/prefix-length
6. Configure the default route.
[edit]
root@# set routing-options static route 0.0.0.0/0 next-hop gateway
7. Enable Web access to launch J-Web.
[edit]
root@# set system services web-management http
8. Commit the configuration changes.
[edit]
root@# commit

Configuring Interfaces, Zones, and Policies with J-Web

IN THIS SECTION
Configuring the Hostname | 258
Configuring Interfaces | 258
Configuring Zones and Assigning Interfaces | 259
Configuring Security Policies | 260
You can configure hostnames, interfaces, zones, and security policies using J-Web.
NOTE: You cannot use J-Web to configure SRX5400, SRX5600, and SRX5800 Services Gateways
in Junos OS Release 15.1X49-D10.
Before you begin:
257