Juniper SRX5800 Hardware Manual page 90

Software release
Cables and connectors
Controls
Supported slots
Power requirement
Weight
Junos OS Release 12.1X47-D15 and later
Slot for Routing Engine
AUX–Connects the Routing Engine to a laptop, a modem, or another auxiliary
device through a cable with an RJ-45 connector.
CONSOLE–Connects the Routing Engine to a system console through a cable with
an RJ-45 connector.
ETHERNET–Connects the Routing Engine through an Ethernet connection to a
management LAN (or any other device that plugs into an Ethernet connection) for
out-of-band management.
RESET button–Reboots the Routing Engine when pressed.
Front panel slot in an SCB installed in:
SRX5400: Bottom slot 0
SRX5600: Bottom slots 0 or 1
SRX5800: Center slots 0 or 1
NOTE: The services gateway host subsystem Routing Engine must be installed in the
SCB in slot 0. A Routing Engine installed in an SCB in slot 1 only enables dual control
links in chassis cluster configurations.
90 W
2.4 lb (1.1 kg)
91