Juniper SRX5800 Hardware Manual page 155

Services gateway
Hide thumbs Also See for SRX5800:
Table of Contents

Advertisement

Software release
Cables and connectors
Controls
Supported Slots
Weight
LEDs
Junos OS Release 9.5R1 and later
16 Gigabit Ethernet SFP ports
Supported SFP transceivers:
1000BASE-LH (model numbers SRX-SFP-1GE-LH, SRX-SFP-1GE-LH-ET)
1000BASE-LX (model numbers SRX-SFP-1GE-LX, SRX-SFP-1GE-LX-ET)
1000BASE-SX (model numbers SRX-SFP-1GE-SX, SRX-SFP-1GE-SX-ET)
1000BASE-T (model numbers SRX-SFP-1GE-T, SRX-SFP-1GE-T-ET)
ONLINE Button–The ONLINE button on the port module front panel toggles the port
module online and offline
Either slot in SRX5K-FPC-IOC Flex IOC
Approximately 1.6 lb (0.7 kg)
OK/FAIL LED, one bicolor:
Steady green–The port module is operating normally.
Red–The port module has failed and is not operating normally.
Off–The port module is powered down.
LINK LED, single color, one per port:
Steady green–The link is active.
Off–No link.
TX/RX LED, single color, one per port:
Blinking Green–The port is receiving or transmitting data.
Off–No activity.
156

Advertisement

Table of Contents
loading

Table of Contents