Srx5K-Re3-128G Routing Engine Boot Sequence - Juniper SRX5400 Manual

Table 8: SRX5K-RE3-128G Routing Engine LEDs (continued)
Label Color
OK/FAIL Green
Yellow
MASTER Blue
DISK1 Green
-
DISK2 Green
-

SRX5K-RE3-128G Routing Engine Boot Sequence

Booting in a SRX5K-RE3-128G Routing Engine follows this sequence—the USB device, SSD1, SSD2, and
LAN. SSD1 is the primary boot device. The boot sequence is tried twice for SSD1 and SSD2.
State
On steadily
On steadily
On steadily
Blinking
Off
Blinking
Off
Description
Routing Engine is powering up.
Routing Engine is not powering up, which indicates
failure.
This Routing Engine is the master Routing Engine.
Indicates presence of disk activity.
There is no disk activity.
Indicates presence of disk activity.
There is no disk activity.
87