Srx5K-Scb3 Leds; Routing Engine Srx5K-Re-13-20 Specifications - Juniper SRX5400 Manual

SRX5400, SRX5600, and SRX5800 Services Gateway Card Reference

SRX5K-SCB3 LEDs

Table 3: SRX5K-SCB3 LEDs
Label Color
FABRIC ACTIVE Green
OK/FAIL Green
Red
–
LINK Green
–
Related
Documentation

Routing Engine SRX5K-RE-13-20 Specifications

48
Table 3 on page 48 describes the SCB3 LEDs and their states.
State
On steadily
On steadily
On steadily
Off
On steadily
Off
SRX5K-MPC3-100G10G Specifications on page 31
SRX5K-MPC3-40G10G Specifications on page 28
Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways on page 4
The SRX5K-RE-13-20 Routing Engine
that runs the Junos operating system (Junos OS). Software processes that run on the
Routing Engine maintain the routing tables, manage the routing protocols used on the
device, control the device interfaces, control some chassis components, and provide the
interface for system management and user access to the device.
Figure 35: Routing Engine
You must install at least one Routing Engine in the services gateway. You can install a
second Routing Engine if both Routing Engines are running Junos OS Release 10.0 or
Description
Fabric is in active mode.
SCB3 is online.
SCB3 has failed.
SCB3 is offline.
Port is enabled and link is established.
Port is disabled or no link is established.
(Figure 35 on page 48) is an Intel-based PC platform
Copyright © 2016, Juniper Networks, Inc.