Maintaining The Srx5800 Line Cards And Modules - Juniper SRX5800 Hardware Manual
Services gateway
Hide thumbs
Also See for SRX5800:
- Hardware manual (480 pages) ,
- Getting started manual (37 pages) ,
- Installation instructions manual (20 pages)
Table of Contents
Advertisement
admin@cluster> monitor interface traffic
To ensure sessions are created and deleted on the upgraded node, issue the following command:
admin@cluster> show security monitoring
14. Repeat Step
1
through
15. To ensure that the ISHU process is completed successfully, check the status of the cluster by issuing
the following command:
admin@cluster> show chassis cluster status
For detailed information about chassis cluster, see the
www.juniper.net/documentation/.
Maintaining the SRX5800 Line Cards and Modules
IN THIS SECTION
Maintaining Interface Cards and SPCs on the SRX5800 Services Gateway | 340
Replacing SRX5800 Services Gateway IOCs | 342
Replacing SRX5800 Services Gateway Flex IOCs | 349
Replacing SRX5800 Services Gateway Port Modules | 355
Replacing SRX5800 Services Gateway SPCs | 360
Replacing SPCs in an Operating SRX5400, SRX5600, or SRX5800 Services Gateways Chassis Cluster | 370
In-Service Hardware Upgrade for SRX5K-SPC3 in a Chassis Cluster | 373
Maintaining MICs and Port Modules on the SRX5800 Services Gateway | 376
Replacing SRX5800 Services Gateway MICs | 376
Replacing SRX5800 Services Gateway MPCs | 383
12
for the primary node.
Chassis Cluster User Guide for Security Devices
339
at
Advertisement
Table of Contents
Troubleshooting
