Juniper SRX5800 Hardware Manual page 141

Hardware features
Software features
LEDs
Junos Trio chipsets for increased scaling for bandwidth,
subscribers, and services
Forty 10-Gigabit Ethernet ports. The ports support SFP+
transceivers.
Requires high-capacity power supplies and high-capacity
fan trays.
The ports are labeled as
0/0 through 0/9
0/10 through 0/19
1/0 through 1/9
1/10 through 1/19
Application security
Application Layer Gateway (ALG)
Attack detection and prevention
Class of service (CoS)
Equal-cost multipath (ECMP) load balancing
GPRS Tunneling Protocol (GTP)
High availability (chassis cluster)
Intrusion detection and prevention (IDP)
IPsec VPN
Layer 2 transparent mode
Logical systems
Network Address Translation (NAT)
Routing protocols (BFD, BGP, IGMP, IS-IS, MLD,
Multicast, OSPF, PIM, RIP, and SCTP)
SSL proxy
Tenant systems
Unified threat management (UTM)
OK/FAIL LED, one bicolor:
Steady green—IOC is functioning normally.
Yellow—IOC has failed.
LINK LED, one green per port:
Steady green—Link is up.
Off—Link is down or disabled.
(seeFigure 63 on page 141):
142