Juniper SRX5800 Hardware Manual page 215

1. On the rear of each rack rail, partially insert a mounting screw into the highest hole specified in
Table 67 on page 215
2. Install the large shelf on the rack. Hang the shelf over the mounting screws using the keyhole slots
located near the top of the large shelf flanges.
3. Partially insert screws into the open holes in the ears of the large shelf.
4. Tighten all the screws completely.
Figure 87: Installing the Mounting Hardware for an Open-Frame Rack
Large
mounting shelf
After the mounting hardware is installed, proceed to
in the Rack" on page 224.
for the large shelf.
Open-frame
rack
"Installing the SRX5800 Services Gateway Chassis
216