Installing An Srx5800 Services Gateway Mic - Juniper SRX5800 Hardware Manual

Figure 145: Removing a MIC
8. Grasp the handles on the MIC faceplate, and slide the MIC out of the MPC card carrier. Place it in the
electrostatic bag or on the antistatic mat.
9. If you are not reinstalling a MIC into the emptied MIC slot within a short time, install a blank MIC panel
over the slot to maintain proper airflow in the MPC card cage.

Installing an SRX5800 Services Gateway MIC

Before you begin to install a MIC:
379