Srx5800 Services Gateway Component Redundancy - Juniper SRX5800 Hardware Manual

Services gateway
Hide thumbs Also See for SRX5800:
Table of Contents

Advertisement

Table 3: Field-Replaceable Units
Field-Replaceable Units (FRUs)
Air filter
Fan tray
Craft interface
AC and DC power supplies (if redundant)
SFP and XFP transceivers
IOCs
Flex IOCs
Port modules of the Flex IOCs
Routing Engine
SCBs
SPCs
MPCs
MICs

SRX5800 Services Gateway Component Redundancy

The following major hardware components are redundant:
Switch Control Boards (SCBs)—The SRX5800 Services Gateway has two SCBs installed and you can
install a third SCB for switch fabric redundancy. The SCB of the host subsystem functions as the master
and the others function as backup. If the SCB of the host subsystem fails, one of the other SCBs takes
over as the master.
Action
You need not power off the services gateway to install, remove, or
replace any of these FRUs.
Power off the services gateway to install, remove, or replace any of
these FRUs.
27

Advertisement

Table of Contents
loading

Table of Contents