Maintaining Mics And Port Modules On The Srx5800 Services Gateway; Replacing Srx5800 Services Gateway Mics - Juniper SRX5800 Hardware Manual

Services gateway

Hide thumbs Also See for SRX5800:

Table of Contents

Maintaining MICs and Port Modules on the SRX5800 Services Gateway

For optimum services gateway performance, verify the condition of the MICs installed in MPCs, and port

modules installed in Flex IOCs.

On a regular basis:

Check the LEDs on MIC and port modules faceplates. The meaning of the LED states differs for various

port modules. If the Flex IOC that houses the port modules detects a port modules failure, the Flex IOC

generates an alarm message to be sent to the Routing Engine.

Issue the CLI show chassis fpc pic-status command. The port module and MIC slots in an FPC are

numbered from 0 through 1, bottom to top:

user@host> show chassis fpc pic-status

For further description of the output from the command, see Junos OS System Basics and Services Command

Reference at www.juniper.net/documentation/.

To replace an MIC, perform the following procedures:

Removing an SRX5800 Services Gateway MIC | 377

Installing an SRX5800 Services Gateway MIC | 379

SRX5k DPC 4X 10GE

1x 10GE(LAN/WAN) RichQ