Connector Pinouts For The Srx5800 Services Gateway Routing Engine Auxiliary And Console Ports - Juniper SRX5800 Hardware Manual

RJ-45 Connector Pinouts for the SRX5800 Services Gateway Routing Engine
Auxiliary and Console Ports
The ports on the Routing Engine labeled AUX and CONSOLE are asynchronous serial interfaces that accept
an RJ-45 connector. The ports connect the Routing Engine to an auxiliary or console management device.
Table 63 on page 204 describes the RJ-45 connector pinout.
Table 63: RJ-45 Connector Pinout for the AUX and CONSOLE Ports
Pin Signal
1 RTS
2 DTR
3 TXD
4 Ground
5 Ground
6 RXD
7 DSR/DCD
8 CTS
Description
Request to Send
Data Terminal Ready
Transmit Data
Signal Ground
Signal Ground
Receive Data
Data Set Ready
Clear to Send
204