Packing Srx5800 Services Gateway Components For Shipment - Juniper SRX5800 Hardware Manual

10. Cover the services gateway with an ESD bag and place the packing foam on top of and around the
services gateway.
11. Replace the accessory box on top of the packing foam.
12. Securely tape the box closed or place the crate cover over the services gateway.
13. Write the RMA number on the exterior of the box to ensure proper tracking.

Packing SRX5800 Services Gateway Components for Shipment

Follow these guidelines for packing and shipping individual components of the services gateway:
When you return a component, make sure that it is adequately protected with packing materials and
packed so that the pieces are prevented from moving around inside the carton.
Use the original shipping materials if they are available.
Place the individual component in an electrostatic bag.
Write the Return Materials Authorization (RMA) number on the exterior of the box to ensure proper
tracking.
CAUTION: Do not stack any of the services gateway components during packing.
469