Juniper SRX5800 Hardware Manual page 145

Software features
LEDs
Serial Number Location
Application security
Application Layer Gateway (ALG)
Attack detection and prevention
Class of service (CoS)
Equal-cost multipath (ECMP) load balancing
GPRS Tunneling Protocol (GTP)
High availability (chassis cluster)
Intrusion detection and prevention (IDP)
IPsec VPN
Layer 2 transparent mode
Logical systems
Network Address Translation (NAT)
Routing protocols (BFD, BGP, IGMP, IS-IS, MLD,
Multicast, OSPF, PIM, RIP, and SCTP)
SSL proxy
Tenant systems
Unified threat management (UTM)
OK/FAIL LED, one bicolor:
Steady green—IOC is functioning normally.
Yellow—IOC has failed.
LINK LED, one green per port (4 per QSFP+ cage):
Steady green—Link is up.
Off—Link is down or disabled.
The serial number label is located as shown in
Figure 66 on page 146.
Figure 66: SRX5K-IOC4-MRAT Serial Number Label
Serial number
ID label
146