Juniper SRX5800 Hardware Manual page 241

Services gateway

Hide thumbs Also See for SRX5800:

Table of Contents

Each power supply must be connected to a dedicated AC power feed and a

dedicated customer site circuit breaker. We recommend that you use a 15 A (250 VAC)

minimum, or as required by local code.

7. Dress the power cords appropriately. Verify that the power cords do not block the air exhaust and

access to services gateway components, or drape where people could trip on them.

8. Repeat Step

through Step

Figure 107: Connecting AC Power to the Services Gateway (Standard-Capacity Power Supplies)

for the remaining power supplies.

Troubleshooting