Srx5K-Re3-128G Routing Engine Boot Sequence; Srx5600 Line Cards And Modules - Juniper SRX5600 Hardware Manual

Table 27: SRX5K-RE3-128G Routing Engine LEDs (continued)
Label Color
OK/FAIL Green
Yellow
MASTER Blue
DISK1 Green
-
DISK2 Green
-

SRX5K-RE3-128G Routing Engine Boot Sequence

Booting in a SRX5K-RE3-128G Routing Engine follows this sequence—the USB device, SSD1, SSD2, and
LAN. SSD1 is the primary boot device. The boot sequence is tried twice for SSD1 and SSD2.

SRX5600 Line Cards and Modules

IN THIS SECTION
SRX5400, SRX5600, and SRX5800 Services Gateway Card Overview | 92
SRX5600 Services Gateway Card Terminology | 93
Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways | 94
SRX5600 Services Gateway Card Cage and Slots | 98
SRX5600 Services Gateway SPC Description | 98
Services Processing Card SRX5K-SPC-2-10-40 Specifications | 99
Services Processing Card SRX5K-SPC-4-15-320 Specifications | 103
Services Processing Card SRX5K-SPC3 Specifications | 108
SRX5600 Services Gateway Interface Card Description | 112
State Description
On steadily Routing Engine is powering up.
On steadily Routing Engine is not powering up, which indicates
failure.
On steadily This Routing Engine is the master Routing Engine.
Blinking Indicates presence of disk activity.
Off There is no disk activity.
Blinking Indicates presence of disk activity.
Off There is no disk activity.
91