Juniper SRX5800 Hardware Manual page 438

Table 69: Chassis Component Alarm Conditions on SRX5400, SRX5600, and SRX5800 Services
Gateways (continued)
Chassis
Component Alarm Condition
System Control An SCB has been removed.
Board (SCB)
An SCB temperature sensor
alarm has failed.
An SCB has failed.
An SCB throughput
decreased.
Remedy
Insert SCB into empty slot.
Replace failed SCB.
Replace failed SCB.
Check fabric plane
summary if all 4 fabric
planes are online.
This alarm could be
raised before all fabric
planes are brought up. It
will be cleared after at
least 4 planes are up.
If all planes are up and
still seeing alarms, raise
a case using the Case
Manager link at
https://www. j u ni p er. n et/support/
or call 1-888-314-5822
(toll free, US & Canada)
or 1-408-745-9500
(from outside the United
States)
Alarm
Severity
Yellow
Yellow
Red
Yellow
439