Installing An Srx5800 Services Gateway Fan Tray - Juniper SRX5800 Hardware Manual

Figure 115: Removing a Lower Fan Tray (Standard-Capacity Shown, High-Capacity Similar)

Installing an SRX5800 Services Gateway Fan Tray

NOTE: To prevent overheating, install the replacement fan tray immediately after removing the
existing fan tray. Do not operate the services gateway for more than two minutes without both
fan trays installed.
Before you begin to install the fan tray:
Ensure you understand how to prevent electrostatic discharge (ESD) damage. See
Electrostatic Discharge Damage" on page
Ensure that you have the following available:
ESD grounding strap
Phillips (+) number 2 screwdriver
505.
"Prevention of
271