LEDs
Serial Number Location
Related
Documentation
Flex I/O Card Port Module SRX-IOC-4XGE-XFP Specifications
Copyright © 2015, Juniper Networks, Inc.
OK/FAIL
LED, one bicolor:
Steady green–The port module is operating normally.
Red–The port module has failed and is not operating normally.
Off–The port module is powered down.
LED, single color, one per port:
LINK
Steady green–The link is active.
Off–No link.
LED, single color, one per port:
TX/RX
Blinking green–The port is receiving or transmitting data.
Off–No activity.
The serial number label is located as shown in
Figure 45: Port Module SRX-IOC-16GE-TX Serial Number Label
Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways on page 35
Flex I/O Card (SRX5K-FPC-IOC) Specifications on page 64
You use port modules and Flex I/O Cards (Flex IOCs) to add different combinations of
small form-factor pluggable transceiver (SFP), 10-gigabit SFP transceiver (XFP), and
copper ports to your services gateway to suit the specific needs of your network. The
SRX-IOC-4XGE-XFP port module
four 10-Gigabit Ethernet XFP ports.
Chapter 4: Line Card and Module Description
Figure 45 on page
Serial number
ID label
JX0123
(Figure 46 on page
70) installs into a Flex IOC to add
69.
69